Audio Output; Synchronizing The Video With The Audio Being Monitored; Selecting The Audio Channel - Canon XA30 Instruction Manual

Audio Output

Audio Output
The camcorder can output audio from the HD/SD-SDI terminal (
AV OUT terminal or × (headphone) terminal. When audio is output from the AV OUT terminal or
× (headphone) terminal, you can configure the following settings.

Synchronizing the Video with the Audio being Monitored

114
When audio is output from the AV OUT terminal or × (headphone) terminal, you can choose to
synchronize the audio signal with the video signal or have the camcorder output the audio in real time.
When the audio is output in real time, there will be a slight delay. Regardless of the setting, however,
the audio and video signals recorded will be synchronized.
Operating modes:
1 Open the [Monitor Delay] submenu.
>
[FUNC.] [MENU]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
Options
( Default value)
[Line Out] Synchronizes the audio and video signals.
[Normal]
Allows you to monitor the audio in real time.

Selecting the Audio Channel

You can select the audio channel that is output from the AV OUT terminal or × (headphone) terminal.
Operating modes:
POINTS TO CHECK
• When performing this procedure in
1 Open the [Audio Output CH] submenu.
>
[FUNC.] [MENU]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
Options
( Default value)
ƒ
[ CH1/CH2]
is output from the right audio channel.
[ š CH1/CH1]
Ÿ
[ CH2/CH2]
Œ
[ All/All] Audio from INPUT 1 and INPUT 2 is mixed and output from both the left and right audio
channels.
NOTES
• If you set an assignable button to [Audio Output CH] (A 100), you can press the button to change
the audio channel directly.
> q >
[Monitor Delay]
> q >
[Audio Output CH]
Audio from INPUT 1 is output from the left audio channel and audio from INPUT 2
Audio from INPUT 1 is output from both the left and right audio channels.
Audio from INPUT 2 is output from both the left and right audio channels.
mode, set the INPUT terminal ON/OFF switch to ON.
only), HDMI OUT terminal,
mode.
mode.