Canon XA50 Instruction Manual page 50

Adjusting the Focus
Magnification
1 Press the MAGN. button.
• Alternatively, you can select [FUNC] >
[^ Magnification] > [OK].
50
• ^ appears at the lower right of the screen and the
center of the screen* is magnified 2 times.
• The magnification frame displayed at the bottom right
corner of the screen shows the approximate part of
the image shown magnified.
2 If necessary, move around the magnification frame to
check other parts of the image.
• Drag your finger on the screen or push the joystick
(ÝÞ).
3 Press the MAGN. button again or select [X] to cancel
the magnification.
* If one of the AF frames or a face detection frame is displayed on the
screen, the area around the active frame will be magnified instead.
NOTES NOTES
• Peaking/magnification are only displayed on the camcorder's screen. They will not appear on video output
from the output terminals and will not affect your recordings.
• Magnification is not available while the color bars are displayed.
• If you set an assignable button to [^ Magnification] (A 94), you can press the button to turn the
magnification on/off.
• Magnification will be turned off when you start recording but you can turn it on/off again while recording.