Audio Output; Selecting The Audio Channels For Headphone Or Speaker Output; Selecting The Audio Channels For Hdmi Output - Canon XA60 Instruction Manual

Audio Output

The camcorder can output audio from the SDI OUT terminal (
(headphone) terminal or speaker (monaural;
recorded with 4-channel audio, you can select the 2-channel output.
Audio output configuration
Audio configuration of the recorded clips
4-channel linear PCM,
16 bit / 24 bit
2-channel AAC,
bit rate: 256 kbps
Operating modes:

Selecting the Audio Channels for Headphone or Speaker Output

You can select the 2-channel output from the × (headphone) terminal or speaker.
1 Select [Monitor Channels].
> [¡ # Audio Setup]
2 Select the desired option and then select [
• The options show combinations of audio channels output from the left and right (L/R),
respectively. Options with a "+" sign ([CH1+2], for example) indicate a mix of two audio channels
on the same side.

Selecting the Audio Channels for HDMI Output

The audio signal output from the HDMI OUT terminal will be 2-channel linear PCM audio (16-bit,
48 kHz sampling).
1 Select [HDMI Channels].
> [¡ # Audio Setup]
2 Select the desired option and then select [
NOTES
• If you set an assignable button to [Monitor Channels] (A 88), you can press the button to toggle
between the audio channel output options.
mode only). When recording or playing back clips
Audio output configuration
SDI OUT terminal
4-channel linear PCM,
24 bit
>
[Monitor Channels]
X
].
>
[HDMI Channels]
X
].
Audio Output
only), HDMI OUT terminal, ×
HDMI OUT terminal
2-channel linear PCM,
16 bit
111