Table of Contents
Advertisement
Menu item
[Distance Units]
[B System Setup] menu
Menu item
[Language H]
[Time Zone/DST]
[Date/Time]
[Wireless Remote Control]
[POWER LED], [Tally Lamp],
[ACCESS LED]
[REMOTE Terminal]
[Assignable Button 1] to
[Assignable Button 5]
[Onscreen Assignable Button]
[CUSTOM Dial & Button]
[Battery Info]
[Backup Menu Settings 7]
[GPS Auto Time Setting]*
Setting options and additional information
[. meters], [/ feet]
Selects the units to use for the focusing distance display while focusing manually. This setting also
affects units for the altitude in the GPS information of geotagged recordings.
Setting options and additional information
[
], [Dansk], [Deutsch], [
[Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [
[Svenska], [Türkçe], [
], [
[
], [
], [
]
["] (home time zone), [#] (travel time zone);
For each: list of world time zones ([New York]), [$] (DST adjustment): turn on or off
(off)
Date and time adjustment fields; [Date Format]: [Y.M.D], [M.D,Y], [D.M.Y]; [24H]: turn on
(24-hour clock) or off (12-hour clock) (off)
In [Date Format] options, Y=year, M=month, D=day.
[i On], [j Off
]
Allows the camcorder to be operated with the supplied wireless controller.
[i On], [j Off]
These settings determine whether the following LEDs and indicators will illuminate.
[POWER LED]: The green POWER/CHG indicator (only when it serves as power indicator).
[Tally Lamp]: When this setting is set to [i On], the tally lamp illuminates while the camcorder is
recording, the wireless controller is operated, the remaining battery charge is too low or a card is
full. The tally lamp is located on the handle unit so make sure you attach it to the camcorder in
advance.
[ACCESS LED]: The ACCESS indicator when the camcorder is accessing an SD card.
[
RC-V100 (REMOTE A)], [
Following are the default settings for each assignable button. For a complete list of the
functions that can be assigned, refer to the detailed table.
1: [B AF/MF], 2: [± Powered IS], 3: [z Pre REC], 4: [
5: [^ Magnification]
For a complete list of the functions that can be assigned, refer to the detailed table
(default: [
Photo]).
[
Tv / Av / M], [
AGC Limit], [y Exposure Comp.], [j Off]
—
Displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
mode) or playback time (
• If the battery pack is depleted, the battery information may not be displayed.
[Save], [Load]
[i Auto Update], [j Disable]
], [English], [Español], [Français], [Italiano],
], [
], [
], [
Standard]
mode).
Menu Options
(A 28)
], [Suomi],
], [
],
(A 28)
(A 27)
(A 89)
(A 94)
Rec Review],
(A 94)
(A 93)
(A 96)
(A 90)
121
Advertisement
Table of Contents
