Menu Options
[É Playback Setup] menu (
Menu item
[¸ Data Code]
[
Data Code]
118
[{ Data Code]
[Æ Recording Setup] menu
Menu item
[Movie Format]
[¸ Resolution]
[
Resolution]
[¸ Frame Rate]
[
Frame Rate]
[¸ Audio Format]
[Recording Media]
[Dual/Relay Recording]
[Slow & Fast Motion]
[Available Space in Memory],
[Used Space in Memory]
[Initialize 8]
[Rec Command]
[HDMI Time Code]
[Time Code Mode]
[Time Code Running Mode]
[DF/NDF]
[Initial Time Code]
[User Bit Type]
[Camera Index]
[Reel Number],
[Clip Number]
[Clip Numbering]
mode only)
Setting options and additional information
[j Off], [% Date]
[j Off], [% Date], [& Time], [
clips) or [{ Camera Data] (photos)
Displays the date when an MP4 clip was recorded ([¸ Data Code]) or the date and/or time or
camera settings used when an XF-AVC clip ([
recorded.
Setting options and additional information
[¸ MP4], [
XF-AVC]
[3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)], [1920x1080 (17 Mbps)],
[1280x720 (8 Mbps)]
[3840x2160 (160 Mbps)], [1920x1080 (45 Mbps)]
[¼ 59.94P], [» 29.97P], [º 23.98P]
[¼ 59.94P], [½ 59.94i], [» 29.97P], [º 23.98P]
[
AAC 16bit 2CH], [
LPCM 16bit 4CH]
[v Rec Media for Movies]: [6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]: [6 Mem. Card A], [7 Mem. Card B]
[v Standard Recording], [4 Dual Recording], [
(or [
Relay Recording])
[j Off], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120], [x600], [x1200]
[6] (SD card A), [7] (SD card B)
Displays a screen where you can check the SD card's total space and speed class as well as the
following information:
mode only: Available space and estimates for remaining recording time (MP4 clips/XF-AVC
clips) and remaining number of photos. Estimates are based on current settings.
mode only: Amount of space in use.
[6 Mem. Card A], [7 Mem. Card B]
[i On], [j Off]
When this setting is set to [i On], you can use the camcorder's REC button to control also the
recording operation of a compatible external recorder connected to the SDI OUT terminal (
only) or HDMI OUT terminal.
[i On], [j Off]
When this setting is set to [i On], the HDMI signal output from the camcorder (only in
mode) includes the camcorder's time code.
[
Preset], [
Regen.]
[
Rec Run], [
Free Run]
[
DF], [
NDF]
Time code input screen (00:00:00.00 to 23:59:59.29)
[
Setting], [
Time], [
[i] (user bit input): 8 hexadecimal characters (00 00 00 00)
[A] to [Z]
[001] to [999]
[m Reset], [n Continuous]
Date and Time], [
Camera Data] (XF-AVC
Data Code]) or a photo ([{ Data Code]) was
Relay Recording]
Date];
(A 44)
(A 44)
(A 44)
(A 44)
(A 44)
(A 77)
(A 34)
(A 34)
(A 46)
(A 33)
u
(A 108)
(A 74)
(A 74)
(A 75)
(A 74)
(A 76)
(A 39)
(A 40)
(A 40)