Communication With Controllers - Siemens SIMATIC HMI Series Operating Instructions Manual

11.12

Communication with controllers

Number of connections
The table below shows the maximum number of controller connections for a Mobile Panel
2nd Generation.
Connection Type
With bus connection
With "SIMATIC HMI HTTP protocol"
Compatible controllers
The table below shows the controllers that you can connect to the HMI device via the
connection boxes.
PLC
SIMATIC S7-1500, SIMATIC S7-1500F
SIMATIC S7-400, SIMATIC S7-400F
SIMATIC S7-300, SIMATIC S7-300F
SIMATIC S7-1200, SIMATIC S7-1200F
SIMATIC S7-200
LOGO
SIMATIC HTTP Protocol
OPC-XML-DA-Server
OPC UA
Allen-Bradley EtherNet/IP
Allen-Bradley DF1
Mitsubishi MC TCP/IP
Mitsubishi FX
Modicon Modbus TCP/IP
Modicon Modbus RTU
Omron Hostlink
NOTICE
In PROFIsafe-based F-system only use S7-12xx CPUs with firmware version ≥ 4.1.
When using a S7-12xx CPU with firmware version <4.1 in a PROFIsafe-based F-system,
faults can occur in the PROFIsafe communication.
If you are using an S7-12xx CPU in a PROFIsafe-based F-system, this CPU must have a
firmware version ≥4.1.
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
Technical specifications
11.12 Communication with controllers
Number of connections, via connection box
8
8
Compatible with Mobile Panels 2nd Generation
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
No
Yes
No
No
253