Parameterizing the Mobile Panel
5.1
Firmware and software
Firmware and software for your HMI device are continually undergoing further developed.
Check regularly whether software updates or patches are available for your HMI device and
install the latest versions.
You can find the latest updates and patches for your HMI device on the Internet
(https://support.industry.siemens.com/cs/ww/en/). Enter the article number of your HMI
device as a search term and filter the contributions according to the by contribution type
"Download".
5.2
Desktop and Start Center
Once the HMI device has been started, the display shows the desktop.
①
②
③
④
The Start Center
The Start Center buttons have the following function:
● Transfer – You switch the HMI device to "Transfer" mode.
The transfer is only activated if at least one data channel has been parameterized, see
section "Parameterizing Transfer (Page 109)".
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
Desktop
Start Center
Start menu
Icon for screen keyboard
5
87