Methods; Create Method - CEM EDGE system Manual

Methods

One Touch Methods are methods created and optimized by CEM for a variety of sample types to reduce the method
development time and effort required by the user. These methods cannot be edited, but they can be copied into
the User Methods folder, where the parameters can be edited.
User Methods are created by the user and can be edited at any time. These methods are typically for users with
unique or specialized products that do not obtain optimal results using a One Touch Method. User methods can be
imported and exported from another instrument.

Create Method

1. Select "User Methods" from the home screen.
2. Select the New icon
3. Enter the appropriate "Settings".
3.1. Enter a unique method name to easily link the method to the sample type being analyzed.
3.2. The preferred Q-Disc will auto fill. To change the Q-Disc, select "Q-Discs Type".
NOTE
You will only be able to run the method if you have Q-Discs available. If you have not scanned them in yet,
do so now.
The preferred Q-Disc can be changed in the software Settings > Run > "Preferred Q-Discs"
3.3. Enter notes specific to method, such as sample type and sample size.
4. Select the "Parameters" tab and enter the appropriate parameters.
in the top right corner of the screen.
Methods 31