Seagull Models SEA 324Y Assembly Manual page 24

GRUMMAN F8F BEARCAT
5.
ELEVATOR PUSHROD HORN
INSTALLATION
Install the elevator control horn using the
same method as with the aileron control
horns.
Position the elevator control horn on the
both side of elevator.
1.
Elevator control horn.
hread one clevis and M2 lock nut on
to each elevator control rod. hread the
horns on until they are lush with the
ends of the control rods.
Elevator and rudder pushrods assembly
as pictures below.
2.
24
820mm.
Instruction Manual.
3.
Elevator pushrod.
M2 clevis.
Fuel tubing.
4.
5.
6.
RUDDER PUSHROD INSTALLATION
Repeat steps as same as steps done for elevator.
Hex nut.
Nylon snap keeper.