Seagull Models SEA 324Y Assembly Manual page 16

GRUMMAN F8F BEARCAT
9.
Pushrod wire.
10.
11.
Reinstall the servo horn by sliding the
connector over the pushrod wire. Center
the throttle stick and trim and install the
servo horn perpendicular to the servo
center line.
16
Instruction Manual.
12.
Move the throttle stick to the closed posi-
tion and move the carburetor to closed.
Use a 2.5mm hex wrench to tighten the
screw that secures the throttle pushrod
wire. Make sure to use threadlock on the
screw so it does not vibrate loose.
13.
COWLING
Please see below pictures.
1.