Installing The Fuselage Servos - Seagull Models SEA 324Y Assembly Manual

GRUMMAN F8F BEARCAT
22.
23.

INSTALLING THE FUSELAGE SERVOS

Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Install the rubber grommets and brass
collets into all servos. Test it the servos
into the fuselage servo mounts.
1.
2) Secure the servos with the screws pro-
vided with your radio system.
Rudder servo.
THROTTLE SERVO ARM
INSTALLATION
12
.
hrottle servo.
Elevator servo.
Instruction Manual.
Install adjustable servo connector in the
servo arm as same as picture below:
1.
2.
Rudder servo arm.
.
INSTALLING THE RECEIVER SWITCH
Install the switch into the precut hole in
the side, in the fuselage.
1.
2.
hrottle servo arm.
Elevator servo arm .
3/32" Hole.
Trim and cut.