Table of Contents
Advertisement
JX3-BN-ETH
Default Configuration -
Bus Node JX3-BN-ETH
Jetter AG
This dialog shows the default configuration for publications (PubToBN_001).
This configuration applies to output data (process data), such as output data
of a peripheral module, to be sent to the bus node.
If you click in Hardware Manager/local controller on "Subscription", the
following dialog opens:
This dialog shows the default configuration for subscriptions of the controller
to messages from the bus node (SubFromBN_001). This configuration applies
to publications from the bus node (PubFromBN_001). JetSym creates this
configuration automatically which lets the bus node publish output data and
the controller subscribe to them.
If you click in Hardware Manager/bus node JX3-BN-ETH on "Publication", the
following dialog opens:
This dialog shows the default configuration for publications on the part of
JX3-BN-ETH. These settings let the bus node publish, for instance, output
data of peripheral modules connected to it.
Commissioning
99
Advertisement
Table of Contents
