Jetter JX3-BN-ETH User Manual page 93

JX3-BN-ETH
Jetter AG
Step
Result:

Hardware Manager lists all detected hardware components in two text
boxes ("Scanned Hardware", "Current Hardware"):

The left text box lists the currently detected hardware.

The right text box lists hardware components that have been set up
and stored by means of Hardware Manager.

The lower text box lists the new set of connected hardware.
7 Enter the scanned hardware into the lower text box using Drag&Drop:

Select the scanned controller to enter it automatically into the lower
text box.

Move the scanned bus nodes from the upper left text box into the
lower text box using Drag&Drop.
8 Click the button "Apply".
Now, the hardware scan is completed and the components are set up in

JetSym.
9 Check the hardware configuration resulting from the automatic
hardware scan.
Commissioning
Action
93