Jetter JX3-BN-ETH User Manual page 46

4 Mounting and Installation
Attaching the Bus Node
Related Topics:
46
To attach the bus node JX3-BN-ETH to the JX3 backplane module proceed as
follows:
Step
1
2
Installing the Bus Node JX3-BN-ETH on a DIN Rail (see page 44)

Removing the Bus Node JX3-BN-ETH from the DIN Rail (see page 47)

Action
Slide the bus node JX3-BN-ETH onto
the JX3 backplane module until the
latches snap into place.
Installation of the bus node
JX3-BN-ETH to the JX3 backplane
module is now completed.
Jetter AG