Enable Out-Of-Band-Resynchronization; Fast-Reroute - H3C S5820X Series Command Reference Manual

If no keyword is specified, all logging is enabled.
Examples
# Enable OSPF logging.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable log

enable out-of-band-resynchronization

Syntax
enable out-of-band-resynchronization
undo enable out-of-band-resynchronization
View
OSPF view
Default Level
2: System level
Parameters
None
Description
Use the enable out-of-band-resynchronization command to enable the OSPF out-of-band
resynchronization (OOB-Resynch) capability.
Use the undo enable out-of-band-resynchronization command to disable the OSPF out-of-band
resynchronization capability.
By default, the capability is disabled.
Examples
# Enable the out-of-band resynchronization capability for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
[Sysname-ospf-1] enable out-of-band-resynchronization

fast-reroute

Syntax
fast-reroute { auto | route-policy route-policy-name }
undo fast-reroute
View
OSPF view
Default Level
2: System level
4-32