Display Ipv6 Routing-Table Statistics - H3C S5820X Series Command Reference Manual

verbose: Displays detailed route information about both active and inactive routes. Without this
keyword, only brief active route information is displayed.
Description
Use the display ipv6 routing-table protocol command to display the routes of a specified routing
protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Direct Routing Table's Status : < Inactive >
Summary Count : 0
See Table 1-4

display ipv6 routing-table statistics

Syntax
display ipv6 routing-table statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 routing-table statistics command to display routing statistics, including total
route number, added route number and deleted route number.
Examples
# Display routing statistics.
<Sysname> display ipv6 routing-table statistics
Protocol route
DIRECT 1
STATIC 3
RIPng 0
OSPFv3 0
IS-ISv6
for description about the above output.
active added
1 1
0 3
0 0
0 0
0 0
Protocol : Direct
Preference: 0
Cost
deleted freed
0 0
0 0
0 0
0 0
0 0
1-18
: 0
0