Display Ip Routing-Table Protocol - H3C S5820X Series Command Reference Manual

Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
For detailed description of the above output, see

display ip routing-table protocol

Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol: Routing protocol. It can be bgp, direct, isis, nat, ospf, rip, static, or guard.
inactive: Displays information about only inactive routes. With this argument absent, the command
displays information about both active and inactive routes.
verbose: Displays detailed routing table information. With this argument absent, the command
displays brief routing table information.
Description
Use the display ip routing-table protocol command to display the routing information of a
specified routing protocol.
Examples
# Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 6
Direct Routing table Status : < Active>
Summary Count : 6
Destination/Mask
2.2.2.0/24
2.2.2.2/32
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
Direct Routing table Status : < Inactive>
Process ID: 0
Interface: InLoopBack0
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Cost: 0
Neighbour: 0.0.0.0
Label: NULL
Age: 1d00h20m52s
Table 1-2.
NextHop
2.2.2.1 Vlan2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1
192.168.80.10
127.0.0.1 InLoop0
1-11
Interface
InLoop0
Vlan1