Display Ospf Peer Statistics - H3C S5820X Series Command Reference Manual

Area: 0.0.0.0
Router ID
1.1.1.2
Table 4-11 display ospf peer command output description
Area
Router ID
Address
Pri
Dead time(s)
Interface
State

display ospf peer statistics

Syntax
display ospf [ process-id ] peer statistics
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf peer statistics command to display OSPF neighbor statistics.
If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Area ID
0.0.0.0
0.0.0.2
Total
Neighbor Brief Information
Address Pri Dead-Time Interface
1.1.1.2 1 40
Field
Neighbor Statistics
Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0 0 0 0
0 0 0 0
0 0 0 0
Eth1/1
Neighbor area
Neighbor router ID
Neighbor interface address
Neighboring router priority
Dead interval remained
Interface connected to the neighbor
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
0 0 0
0 0 0
0 0 0
4-25
State
Full/DR
Description
1 1
1 1
2 2