Mtcdt-Lvw2-246 With Modem And No Accessory Cards; Mtcdt-246A No Modem And No Accessory Cards - Multitech MultiConnect Conduit MTCDT Hardware Manual

POWER DRAW
Radio Protocol
LTE
1
Max Power: The continuous current during maximum data rate with the radio transmitter at maximum power.
2
Peak Tx Current: The average peak current during an EGSM900 transmission burst period or LTE connection. The
transmission burst duration for EGSM900 can vary, depending on what transmission scheme is being deployed
(GPRS Class 8, Class 10, GSM, etc.).
3
Total Inrush Charge: The total inrush charge at power on expressed in Millicoulombs (mC).
Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into the power source when
determining product load.

MTCDT-LVW2-246 with Modem and No Accessory Cards

Radio Protocol
9.0 Volts
LTE
12.0 Volts
LTE
24.0 Volts
LTE
1
Max Power: The continuous current during maximum data rate with the radio transmitter at maximum power.
2
Peak Tx Current: The average peak current during LTE connection.
3
Total Inrush Charge: The total inrush charge at power on expressed in Millicoulombs (mC).
Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into the power source when
determining product load.

MTCDT-246A No Modem and No Accessory Cards

Voltage
9.0 Volts
12.0 Volts
14
Idle Cellular Average Tx
Connection no Current at Max
data (Amps) Power Passing
Data (Amps)
0.102 0.249
Idle Cellular Average Tx
Connectionno Current at Max
data (Amps) Power Passing
Data (Amps)
0.175 0.482
0.148 0.375
0.100 0.214
No Connections Ethernet
1
(Amps) Connected only
(Amps)
0.147 0.155
0.124 0.128
Peak Tx Current
2
(Amps)
1
0.316
Peak Tx Current
2
(Amps)
1
0.556
0.499
0.303
Maximum
Current (Amps)
2
0.222
0.175
Total Inrush Total Inrush
3
Charge (mC) Charge Duration
(mS)
3.65 17.9
Total Inrush Total Inrush
3
Charge (mC) Charge Duration
(mS)
4.87 9.7
4.2 8.5
3.65 17.9
Total Inrush Total Inrush
3 4
Charge (mC) Charge Duration
(mS)
3.92 9.7
3.26 8.54
®
MultiConnect Conduit
TM
Hardware Guide