Barco OVERVIEW CDG67-DL Installation Manual page 32

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
Place the front and bottom shielding, remove
the tape shielding and position the shielding on
to the structure. Use the drive fastener to fix
the shielding onto the corner brackets.
Make sure to use the nippled hammer bolts
and spring washers to assure proper grounding.
In case coated material is fixed with In case coated material is fixed with
In case coated material is fixed with In case coated material is fixed with
ham m m m mer bolts to the profile: Make sure to ha ha ha mer bolts to the profile: Make sure to mer bolts to the profile: Make sure to mer bolts to the profile: Make sure to
use the nippled hammer bolts and spring use the nippled h use the nippled h use the nippled h ammer bolts and spring ammer bolts and spring ammer bolts and spring
was was was wash h h h ers to provide proper groun ers to provide proper ground d d d ing ers to provide proper groun ers to provide proper groun
______________________________________________________________
3. Mechanical setup
MIR04
ing. ing ing
3-13