Table of Contents
Advertisement
3. Getting Started
3.1. Unpacking the VP8800
The VP8800 requires a data cable and, if the data cable does not supply power, a 5VDC 1.2A power
supply. The data cable is not included with the VP8800 and must be purchased separately from ID TECH.
Verify that you have all the required components for the installation:
VP8800 (PN: IDPP-1881)
Interface Cables:
Serial Data Cable (PN 80143236-001)
•
USB Data Cable (PN 80143234-001)
•
Ethernet Cable (PN 80143235-001)
•
Power supply (included)
You may also need a contactless test card (ViVO Contactless Test Card P/N 241-0015-03).
3.2. Data on production and personalization
The device has been loaded with a serial number, MAC address, data encryption key, and PIN encryption
key by the factory.
Page | 6
Advertisement
Table of Contents
