Table of Contents
Advertisement
5. Click Execute Command.
6. A File Explorer window will open; navigate to the directory where you extracted the firmware
ZIP, then open images_for_VLoader >pisces_signed_r25680.bin.
7. Wait for the USDK Demo to complete the firmware update.
8. After the USDK Demo applies the firmware, the VP8800 will reboot and validate the firmware
file. Please note that this can take up to five minutes to complete.
After restarting, the VP8800 will have updated firmware and display its Welcome screen.
7. Appendix A: Specifications
VP8800 Specifications
RF Interface
Frequency 13.56 MHz
Standard ISO 14443 Type A&B, Mifare, ISO 18092
Reading distance MAX 4cm
Physical
Length 175 mm
Width 95 mm maximum
Depth 58 mm maximum
Weight 0.4Kg
Storage 128 MB RAM + 64MB Flash + 32GB of Micro-SD, with 3 SAM slots
Environmental
Operating Temp. 0 to 55° C (32 to 131° F)
Storage Temp. -25 to 65° C (-13 to 149° F)
Relative Humidity 10 to 95% non-condensing
Operating Environment Indoor only
Power
Voltage 5 VDC regulated, +/- 10%
Consumption 6 W maximum
Power supply The VP8800 shall be powered by an external power source (P/N AC005R)
Touch Screen
LCD Capacitive 3.5" TN TFT Backlit Color Display
Signature Capture Yes
Resolution HVGA 480X320 Pixels
(power-pack AC 85-265)
Page | 18
Advertisement
Table of Contents
