Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 8

R E D M A N P O W E R C H A I R
Mode
The Mode button may be pressed to go back and forth from the "drive" screen and the
"positioning" screen (shown in Figure 2). After pressing the Mode button, you will view the body
positioning screens shown in three of the images in Figure 2. Using the joystick, scroll side to side to
transition through the three available positions.
Profile
Next, by pressing the Profile button, you will shift through different profiles of speed starting at
Profile 1 and escalating to Profile 5. Within each profile you can tailor the speed using the Increase/
Decrease Speed button as shown in Figure 1, and the screen available when doing so is shown in the
bottom left of Figure 2.
Safety Switches
There are two safety switches added to the chair to help assure your security. They are the recline
safety switch and the docking safety switch.
These switches are programed into the chair. If
reclined too far back or the legs too far forward,
the stand will not work. The same is true if you
are already in a standing position; you will not be
able to return to a seated position if you are
reclined too far back. Again, you may find you
will not be able to bring your legs out when you
are even at a slight "stand." It may take time to
get used to where the chair activates its safety
switches. We encourage you take the time to
Figure 2
practice in your chair.
3