Battery Indicator; Speed Indicator - Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual

5.1.1 Battery Indicator

This displays the charge available in the battery and can be used to alert the user to the status of the battery.
Refer to section 11 for a description of how to read the Battery Gauge.
5.1.2

Speed Indicator

5.1.3 Current Profile
5.1.4 In Focus
5.1.5 Speed Limit
5.1.6 Latched
Steady
This indicates that all is well.
Flashing Slowly
The control system is functioning correctly, but you should charge the battery as soon as possible.
Stepping Up
The wheelchair batteries are being charged. You will not be able to drive the wheelchair until
the charger is disconnected and you have switched the control system off and on again.
This displays the current speed setting.
The speed setting is adjusted using the Speed Buttons.
The Profile Number describes which Profile the control system is currently operating in.
The Profile Text is the name or description of the Profile the control system is currently operating in.
When the control system contains more than one method of direct control, such as a secondary
Joystick Module or a Dual Attendant Module, then the Module that has control of the wheelchair will
display the In Focus symbol.
If the speed of the wheelchair is being limited, for example by a raised seat, then this symbol
will be displayed.
If the wheelchair is being inhibited from driving, then the symbol will flash.
When the control system is operating in a latched condition this symbol will be displayed
28