Arm Rest Angle; Footplate Height - Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual

Footplate Height Adjustment
To adjust the footplate height, reference Figure 23. Use
the appropriate hex key to unscrew the button-head
bolts and insert them at the desired height. Must be
done for both sides using the predrilled holes. The
adjustment height must be the same at both bolts.
Tighten bolts securely when the adjustment is complete.
Figure 22
Arm Rest Angle Adjustment
To adjust the angle of the arm rests reference
Figure 22. The circled bolts must be loosened
to perform the adjustment. Once all bolts are
loosened, the "pull string" in the bottom right
image can be pulled to the desired angle and the
bolts retightened.
19
Figure 23