Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 40

6.3.3 Speed Display
6.3.4 Maximum Speed Indicator
6.3.5 Digital Speed Display
6.3.6 Latched
6.3.7 Inhibit
:: Mode Screens ::
6.3.8 Actuator Mode
This gives a proportional display of the wheelchairs speed. The Arc begins
at 0% and has a programmable maximum. The programmable
parameter is Max Displayed Speed. Refer to the Programming Chapter.
This displays the current maximum speed setting.
This displays the actual speed of the wheelchair derived from the motors. The display
can be set to mph or km/h.
These adjustments can be made in the OBP Menu.
When the control system is operating in a latched condition this symbol will
be displayed.
If the speed of the wheelchair is being limited; for example, by a raised seat, then this
orange symbol will be displayed.
If the wheelchair is being inhibited from driving, then this red symbol will be flashing.
Displays the sections of the chair currently selected for movement, the name
given to the selection and a direction arrow showing what sort of movement is
available.
35