Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 12

Figure 4
If your chair has zerk fittings,
indicated in Figure 5, apply lubrication
to those points. If your chair does not
have zerk fittings, lubricate the seams
as indicated by the arrows in Figure 5
and clean away the excess. We
recommend the use of a grease gun
for this procedure.
Figure 6
Lubrication points for foot pieces are shown to the
left. (Note that the washer may be of a different color)
Bearings on Front Wheel Fork
The bearing assembly needs periodic lubrication with a moly or
lithium grease, and in time may need an adjustment if you
experience wheel chatter/flutter. Periodic adjustment of tipper
fork bearings is recommended but not pictured as a part of this
maintenance manual. Please contact Redman Power Chair for
further instructions on how to complete this task.
7
Figure 5