Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 35

5.2 Momentary Screens
If the momentary screens are programmed to be displayed then pressing the Speed or Profile Buttons will
display screens such as below.
Speed Momentary Screen Profile Momentary Screen
5.3 Diagnostic Screen
When the control system safety circuits have operated and the control system has been prevented from moving
the wheelchair a diagnostics screen will be displayed.
This indicates a system trip, i.e. the R-net has detected a problem somewhere in the wheelchair's electrical
system.
If the error is in a non-active module, for example in the ISM but with a drive Profile is selected, then drive will
still be possible, however, the diagnostic screen will appear intermittently.
.3.1 Identified Module
This identifies which module of the control system has registered the problem, such:
PM Power Module
JSM Joystick Module
ISM Intelligent Seating/lighting Module
.3.2 Trip Text
The Trip Text gives a brief description of the trip type.
.3.3 Trip Code
The 4 digit code displayed gives the exact trip that has been recorded.
.3.4 Diagnostic Procedure
Please follow this procedure:
• Read and note the Trip Text displayed, the identified Module and the Trip Code.
• Switch off the control system.
30