Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 51

14 Programming
The control system can be programmed to meet your needs. Programming can be performed using the OBP (On-
board Programming) feature or the specialist R-net software and Dongle or the Diagnostic Test Toll (DTT).
If you re-program your control system, make sure that you observe any restrictions given in your wheelchair user
manual. Note any changes you make for future reference.
Programming should only be conducted by healthcare professionals with in-depth
knowledge of PGDT electronic control systems. Incorrect programming could
result in an unsafe set-up of a wheelchair for a user. PGDT accepts no liability for
losses of any kind if the programming of the control system is altered from factory
preset values.
15 Joystick Knobs
The knob fitted to your joystick is suitable for most applications. If you would prefer another type, there is a
range of alternatives available. Please contact your wheelchair distributor or manufacturer for advice. Do not
replace the joystick knob with any unauthorized item - it may cause hazardous operation.
Do not replace the joystick knob with any unauthorized item It may
cause hazardous operation. PGDT accepts no liability for losses of any
kind arising from failure to comply with this condition.
46