Redman Power Chair CHIEF 107 SERIES Owner's/Operator's Manual page 31

4.2.4 Speed Increase Button
This button increases the maximum speed setting.
Depending on the way the control system has been programmed a momentary screen may be
displayed when the button is pressed.
Refer to section 5 for details of the momentary screen
Refer to Chapter 3 - Programming for details.
4.2.5 Mode Button
The Mode button allows the user to navigate through the available operating Modes for the control
system. The available modes are dependent on programming and the range of auxiliary output
devices connected to the control system.
Refer to Chapter 3 - Programming for details.
4.2.6 Profile Button
The Profile button allows the user to navigate through the available Profiles for the control system.
The number of available Profiles is dependent on how the control system is programmed.
Depending on the way the control system has been programmed a momentary screen may be
displayed when the button is pressed.
Refer to section 5 for details of the momentary screen.
Refer to Chapter 3 - Programming for details.
4.2.7 Hazard Warning Button and LED
This button activates and de-activates the wheelchair's hazard lights. Depress the button to turn the
hazards on and depress the button again to turn them off.
When activated the hazard LED and the indicator LEDs will flash in sync with the wheelchair's
indicators.
4.2.8 Lights Button and LED
This button activates and de-activates the wheelchair's lights. Depress the button to turn the lights
on and depress the button again to turn them off.
When activated the lights LED will illuminate.
4.2.9 Left Indicator Button and LED
This button activates and de-activates the wheelchair's left indicator. Depress the button to turn the indicator on and
depress the button again to turn it off.
When activated the left indicator LED will flash in sync with the wheelchair's indicator(s).
4.2.10 Right Indicator Button and LED
This button activates and de-activates the wheelchair's right indicator. Depress the button to turn the indicator on and
depress the button again to turn it off.
When activated the right indicator LED will flash in sync with the wheelchair's indicator(s).
4.2.11 External On/Off Switch Jack
This allows the user to turn the control system on and off using an external device, such as a buddy button.
26