Advertisement
Temperature (T)
Sensor
T-accuracy
Outputs
Analogue output
Digital output
General
Power supply
for 4-20 mA, 2-wire
for 0-20 mA, 3-wire
for 0-5 V / 0-10 V / RS485
Current consumption at 24 V
Voltage output
Current output
2-wire
3-wire
Digital interface
Display
Connection
Housing material
Protection class
Cable gland
Probe cable (type C)
Sensor protection
Electromagnetic compatibility
Temperature ranges
Temperature ranges with display
1 USA & Canada: class 2 supply required, max. supply voltage 30 V
SETUP AND ADJUSTMENT
The EE210 transmitter is ready to use and does not require any confi guration by the user. The factory setup of EE210 corresponds to
the type number ordered. (Ordering guide please see data sheet at www.epluse.com/EE210.)
If needed, the user can change the factory setup by using the optional E+E Product Configuration Adapter (EE-PCA) and the E+E
Product Configuration Software (EE-PCS).
PC
One can assign other physical quantities to the analogue outputs, change the scaling of the outputs, set the display and perform one or
two point adjustment for humidity and temperature.
For confi guration with EE-PCA and EE-PCS both 4-20 mA two-wire outputs must be connected.
For product data sheets EE-PCS and EE-PCA please see www.epluse.com.
The E+E Product Configuration Software (EE-PCS) is free and can be downloaded from www.epluse.com/ee-configurator.
Pt1000 (tolerance class B, DIN EN 60751) integrated in HCT01
wall & duct
∆ °C
0-5 V / 0-10 V
4-20 mA (2-wire)
0-20 mA (3-wire)
RS485 (BACnet MS/TP or Modbus RTU), max. 32 EE210 in one bus
10 V + R
x 20 mA < V+ < 30 V DC
L
15-35 V DC
or 24V AC ±20 %
1)
DC supply max. 12 mA;
AC supply max. 34 mA
DC supply max. 40 mA;
DC supply typ. 33 mA;
AC supply typ. 65 mA
DC supply typ. 5 mA;
AC supply typ. 15 mA
1, 2 or 3 lines, user configurable, optional with backlight
Screw terminals, max. 1.5 mm
Polycarbonate, UL94V-0 (with Display UL94HB) approved
IP65 / NEMA 4
M16 x 1.5
PVC, Ø 4.3 mm, 4 x 0.25 mm
E+E Coating
EN61326-1 EN61326-2-3
Industrial Environment
Operating: -40...60 °C
Storage:
-40...60 °C
Operating: -20...50 °C
Storage:
-20...60 °C
HA011050
HA011062
remote probe
∆ °C
°C
-1 mA < I
< 1 mA
L
R
≤ 500 Ohm
L
R
≤ 500 Ohm
L
with display max. 23 mA
;
with display max. 49 mA
rms
with display max. 40 mA
with display max. 44 mA
;
with display max. 84 mA
rms
with display max. 20 mA
;
with display max. 35 mA
rms
2
, Length: 1.5 or 3 m (4.9 or 9.8 ft)
2
(-40...80 °C for remote probe EE210P)
(-40...140 °F)
(-40...140 °F)
(-40...80 °C for remote probe EE210P)
(-4...122 °F)
(-4...140 °F)
EE210
rms
rms
rms
V03
(optional)
°C
Advertisement
