Cardinal 190 Series Installation, Technical And Operation Manual page 88

Model 190 Installation, Technical and Operation
Page 78
Key
ON/OFF: The ON/OFF key is used to turn the
indicator on and off.
 Press the ON/OFF key when the indicator is
off to turn the indicator ON. The 190 will
perform a display test (turn on all segments)
and then show the model number and
software version.

If the indicator is already on, press the
ON/OFF key and hold for 2 to 3 seconds.
When the display shows OFF, release the
key to turn the indicator OFF.
ZERO: The ZERO key is used to zero the weight
display. Up to the selected limit of 4% or 100%
of the scale's capacity can be zeroed. This limit
is selected during the setup and calibration of the
indicator.
Note that the indicator will not respond to
pressing the ZERO key unless the weight display
is stable.
 When displaying a Tare weight, pressing
the ZERO key will clear the Tare value and
set the display to Gross mode.
 When displaying the Peak weight, pressing
the ZERO key will clear the Peak weight.
 When displaying the Gross accumulator,
pressing the ZERO key will clear the Gross
accumulator.
 When displaying the Net accumulator,
pressing the ZERO key will clear the Net
accumulator.
Description
8400-M022-O1 Rev J