Cardinal 190 Series Installation, Technical And Operation Manual page 124

Model 190 Installation, Technical and Operation
Page 114
Request Displayed Weight Command (SMA Format)
The wireless device sends:
<LF>W<CR>
The 190 will respond with displayed weight in SMA format:
<LF><s><r><n><m><f><xxxxxxx.xxx><uuu><CR>
where:
<LF>
<s>
<r>
<n>
<m>
<f>
<xxxxxxx.xxx
>
<uuu>
<CR>
= line feed (hex 0A)
= scale status
Z = center of zero
O = over capacity
U = under capacity
E = zero error
T = tare error
e = weight is not being displayed
space = none of the above
NOTE: For the E or T error conditions,
<xxxxxxx.xxx> = ----------
= range (always 1)
= mode
G = gross
T = tare
N = net
= motion status
M = unstable
space = stable
= always a space
= weight (fixed at ten characters)
= units of measure
("lb ", "oz ", "kg ", or "g ")
= carriage return (hex 0D)
8400-M022-O1 Rev J