Table of Contents
Advertisement
11. TEST MODE/ DIAGNOSTICS
11.1 Test Mode/Diagnostics Features
11.2 Accessing Test Mode/Diagnostics
To access the Test Mode/Diagnostics feature, with the indicator ON, press
the Fn/ key and then press the UNITS/ key. Each test lasts about one
second.
8400-M022-O1 Rev J
The Cardinal Model 190 Weight Indicator has a comprehensive
diagnostics feature that can allow it to self-diagnose a problem. After
displaying the model number, software revision and performing a display
test, the indicator will enter the diagnostics mode.
The diagnostics feature will check to ensure that the internal memory is
functioning correctly, that setup parameters (as well as other operational
parameters) are within range and that the battery (if equipped with
batteries) voltage is correct for operation.
The model number (190 ) will be displayed
1.
The software version ( r #.#.# ) will be displayed.
2.
All horizontal segments will turn on and then off.
3.
All vertical segments and decimal points will turn on and then off.
4.
The key status arrows will turn on and then off.
5.
Each weight mode annunciator (lb, kg, etc.) will turn on and then off.
6.
The diagnostics feature will perform an internal memory check, verify
7.
that the setup parameters (and other operational parameters) are
within range and if equipped with batteries, that the voltage is correct
for operation.
SETUP= and PASS will be displayed if everything passes the
8.
diagnostic check.
The calibration numbers (C1 to C4) will be displayed.
9.
Model 190 Installation, Technical and Operation
Page 125
Hide quick links:
Advertisement
Table of Contents
