Fixing The Cables To The Rear Cabinet Panel - Siemens SINAMICS S120 System Manual

9.6.2

Fixing the cables to the rear cabinet panel

1. Fix the DC link connecting cables directly next to the last component at the rear control
cabinet panel. Use the C-profile rails and the appropriate cable clamps from the Rittal
company. The distance between the C profile rail and the lower side of the component is
approximately 125 mm.
2. Appropriately insulate the cable cores at the connection location before mounting.
①
②
③
④
⑤
Figure 9-4
High Frequency Drive
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
Control cabinet panel
DC link adapter
Cores of the DC link connecting cable
C-profile rail from Rittal company (article number 7831.570 / 7831.571)
Cable clamps for C profile rails from the Rittal company.
Fixing the DC link connecting cable to the control cabinet panel, dimensions in mm
and (inch)
DC link adapter
9.6 Electrical connection
147