Displaying The Configuration/Topology - Siemens SINAMICS S120 System Manual

10.3.3

Displaying the configuration/topology

To show the configuration and the topology at the user interface, a High Frequency Drive
with a pulse frequency of 16 kHz connected to an NX15.3 has been commissioned.
Configuration view
To call the configuration of the HF line-up, at the user interface in the "Startup" operating
area, change to "Drive system" > "Drive unit" > "Configuration".
The actual configuration is displayed as shown below.
Figure 10-5
High Frequency Drive
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
High Frequency Drive in the configuration view
10.3 Commissioning with SINUMERIK Operate
Configuring
161