Table of Contents
Advertisement
• Wear suitable work clothing
• Use breathing protection or a vizard for work
which
produces
developing solvent steams:
Avoid health dangers by inhalation and skin
contacts
of
solvent
aerosols; Cornea injuries by splashes in the eye.
Warning
For your own safety, use only accessories and equipment listed in the
operating
recommended in the operating manual may create a hazard to personal safety.
Use only original Wagner replacement parts!
Alteration or repair of Wagner original spare parts may cause fatal
accidents or explosions in the coating system!
1.2
EC Declaration of conformity
Wagner hereby declares that the unit described in these operating instructions has been
designed and manufactured according to the provisions of EU Directives 98/37/EC,
94/9/EC, 73/23 EEC and 89/336 EEC.
The following European standards were applied:
EN 12100-1/-2
EN 61000-6-2
EN 50053-2
The following German standards and/or Guidelines were applied:
BGI 764
The product includes an EC declaration of conformity. This can be ordered again if
necessary from your WAGNER dealer by giving details of the product and serial number
involved.
The number of the EC Declaration of Conformity is 0351967.
6
powder
and
when
steams
and
lacquer
manual.
The
use
EN 50281-1-1/-1-2
EN 61000-6-3
EN 50050
0351709
• Check the equipment for damage
Before operating the system, check if slightly
damaged parts still function correctly. Check
whether the moving parts operate properly,
whether they jam and whether parts are
damaged.
Damaged
parts
replaced by a Wagner customer service.
of
individual
parts
- PEM-T3
Safety regulations
010102_ .doc
should
be
repaired
other
than
those
0103_Konformitaet.doc
EN 61000-6-1
EN 60204-1
EN 50177
03/2008
or
Advertisement
Table of Contents
