Operating Conditions - KEB COMBIVERT R6 Instruction Manual

3.2

Operating conditions

Definition according to
Site altitude
Ambient conditions during operation
Climate
Mechanical
Contamination
Ambient conditions during transport
Climate
Mechanical
Contamination
Ambient conditions for the storage
Climate
Mechanical
Contamination
Type of protection
Environment
Definition according to
EMC emitted interference
Cable-based interferences
Radiated interferences
Interference immunity
Electro-static discharge EN 61000-4-2
Burst - control lines + bus EN 61000-4-4
Burst - mains supply EN 61000-4-4
Surge - mains supply EN 61000-4-5
Immunity to conducted
induced by radio-frequency
Electromagnetic fields EN 61000-4-3
Voltage variation / voltage drop EN 61000-2-1
Voltage unsymmetries /
frequency changes
Standard
EN 61800-2
EN 61800-5-1
Temperature
Humidity
EN 60721-3-3
Vibration
Gas
Solids
Temperature
Humidity
Vibration
EN 60721-3-2
Surge
Gas
Solids
Temperature
Humidity
Vibration
EN 60721-3-1
Surge
Gas
Solids
EN 60529
IEC 664-1
EN 61800-3
EN 55011
EN55011
EN 61000-4-6
disturbances,
fields
EN 61000-2-4
Technical Data
Standard/
class
Inverter product standard:
rated specifications
Inverter product standard:
general safety
max. 2000 m above sea level
(with site altitudes over 1000 m a derating of
1 % per 100 m must be taken into considera-
(with temperature over 45°C to max. 55°C
3K3
a derating of 5 % per 1 K must be taken into
3K3 5...85 % (without condensation)
max. amplitude of a vibration 1 mm (5...13 Hz)
3M1 max. acceleration amplitude 7 m/s²
3C2
3S2
2K3
2K3
max. vibration amplitude 3.5 mm (2...9 Hz)
2M1
max. acceleration amplitude 15 m/s² (9...200 Hz)
2M1
2C2
2S2
1K4
1K3
max. amplitude of a vibration 1 mm (5...13 Hz)
1M1
max. acceleration amplitude 7 m/s² (13...200 Hz)
1M1
1C2
1S2
IP20
Pollution degree 2
Inverter product standard: EMC
C2 with EMC filter and ferrit upto 100 m line length
C2 with EMC filter and ferrit
8 kV AD (air discharge) and CD (contact discharge)
2 kV
4 kV
1 / 2 kV Phase-phase / phase-ground
10 V 0.15-80 MHz
10 V/m
+10 %, -15 %; 90 %
3 %; 2 %
Instructions
tion)
extended to -10...45 °C
consideration)
(13...200 Hz)
(without condensation)
max. 100 m/s²; 11 ms
(without condensation)
max. 100 m/s²; 11 ms
GB - 17