Mounting A Microscopy Camera (Optional) - Unitron MEC4 Manual

MEC4 INVERTED METALLURGICAL MICROSCOPE
Operation
(continued)
Mounting a Microscopy Camera
(Optional)
(Fig. 22)
Camera
Installing Couplers
②
④
Loosen the lock screw ① and remove the dust cap
② on the photo port ③.
Loosen the lock screw ① until it is flush with the
inside of the photo port.
③
Remove caps from your CCTV lens ④ and attach ①
the top opening to the threaded mount on your
camera.
Attach the bottom threaded mount of the CCTV lens
④ (with the mounted camera) onto the photo port ③
and tighten the lock screw ①.
Fig. 22
Selecting the Light Path for Observation
With a Camera
Refer to page 12.
UNITRON
17