Cleaning The Stainless Steel Milk Flask; Cleaning The Milk Pipework Manually Or Using The Maintenance Programme - Miele CM 7750 Operating Instructions Manual

Cleaning the stainless steel
milk flask
The stainless steel milk flask should be
taken apart and cleaned every day.
 Clean all parts by hand only using
hot water, a little washing up liquid
and a soft cloth. Use a small cleaning
brush to remove milk residue from the
milk pipework if necessary.
 Rinse all parts thoroughly under
running water.
Residual washing-up liquid can affect
the taste of milk from the machine and
the quality of the milk froth.
 Dry all parts afterwards.
 Reassemble the stainless steel milk
flask.
Cleaning the milk pipework
manually or using the
maintenance programme

Risk to health due to inadequate
cleaning.
Milk naturally contains bacteria. Heat
and moisture inside the coffee
machine can cause these bacteria to
multiply, e.g. milk residues can go off
and pose a risk to health.
Clean all components in which milk
is transported on a regular basis.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
Cleaning and care
When you confirm the message
with OK, the internal
the milk pipework
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little washing-up liquid
(see "Cleaning the central spout with
integrated cappuccinatore").
– Or you can clean the milk pipework
using the Clean the milk pipework
maintenance programme together
with the Miele Cleaning agent for milk
pipework (see "Cleaning the milk
pipework").
Useful tip: In addition to your weekly
cleaning routine we recommend
carrying out the alternative cleaning
procedure once a month. For example,
if you manually clean the machine once
a week, then you should run the
maintenance programme once a month.
This combination will ensure that the
milk pipework is cleaned optimally.
Clean
79