Operating instructions Coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 11 674 750...
Disposal of the Miele descaling cartridge Please dispose of it at your local Dispose of the used Miele descaling community waste collection / recycling cartridge in your household waste. centre for electrical and electronic appliances, or contact your dealer or Miele for advice.
Contents Caring for the environment ................Warning and Safety instructions..............Guide to the machine ..................16 Rear of machine ....................17 Milk flask and milk siphon ................... 18 Unpacking and installing .................. 19 Unpacking the coffee machine ................19 Accessories supplied ..................19 Setting up and connecting the coffee machine ..........
Contents Cancelling a drink....................40 Tea........................41 TeaTimer......................41 Making tea......................42 Cancelling tea preparation .................. 42 Tea pot: making several cups of tea, one after the other ........42 Dispensing hot water ..................44 Parameters......................45 Ground quantity....................45 Brewing temperature ...................
Demo mode....................61 Factory default..................... 61 Appliance settings..................61 Network configuration ..................62 Networking......................63 Setting up the network (Miele@home)..............63 Setting up the network again ................64 Remote control....................64 MobileStart ......................65 RemoteUpdate ....................66 Cleaning and care ..................... 67 Overview of cleaning intervals................
Contents Automatic descaling ..................86 Please note before and during automatic descaling:.......... 86 The Miele descaling cartridge ................87 Fitting and removing a descaling cartridge ............ 88 Set the start time for automatic descaling (Descaling timer) ......89 Cancelling automatic descaling ................89 Switching off automatic descaling ..............
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them...
Warning and Safety instructions Correct application This coffee machine is intended for home use. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted. This coffee machine is not intended for outdoor use.
Warning and Safety instructions Safety with children Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
Warning and Safety instructions To avoid the risk of damage to the machine, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply, before connecting the machine to the mains supply. Consult a qualified electrician if in any doubt.
Miele authorised service technician. While the machine is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty is invalidated. The coffee machine must be disconnected from the electricity supply during repair work.
Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components.
Warning and Safety instructions Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine. Only fill the coffee chute with ground coffee beans. Do not use any caramelised ready ground coffee.
Warning and Safety instructions Accessories and spare parts Miele can only guarantee the safety of the machine when original Miele spare parts are used. Faulty components must only be replaced by genuine Miele original spare parts. Only use original Miele accessories. If other parts are used, warranty, performance and/or product liability claims will be invalidated.
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. Stainless steel surfaces are susceptible to scratching. Even magnets can cause scratches.
Guide to the machine a On/Off button b “Back” sensor c Touch display d Cup heating e Water container f Bean system with 3 bean containers g Park position for milk tube h Grinder setting i Ground coffee drawer with integrated coffee scoop j Brew unit k Height-adjustable central spout with lighting l Drip tray with lid and waste container...
Guide to the machine Milk flask and milk siphon a Milk flask b Milk siphon c Milk pipe Central spout in detail a Dispensing spouts for coffee and milk b Cup sensor c Hot-water spout d Stainless steel cover...
(starter set) - Do not place the coffee machine near a window in direct sunshine or right - Miele descaling tablets (starter set) next to an appliance that gives off - Miele descaling cartridge heat. These would subject the...
*INSTALLATION* Unpacking and installing - The coffee machine must be set up on a level surface. The surface must be water resistant. - The appliance door must be opened completely to remove the brew unit. Place the coffee machine in the location you want to use it.
Operation Touch display Operation You can only select options which are The delicate touch display can be highlighted in light grey. scratched by pointed or sharp objects, e.g. pens. Each time you touch a possible option Only touch the display with your the relevant field lights up partially or fingers.
Operation Entering numbers Use the numerical keypad to enter numbers, e.g. if you want to set a timer duration. The numerical keypad will appear automatically in the relevant menus. Space Save Select the letters or characters you want. Touch Save ...
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation This symbol indicates the “Settings” menu and the “Language” menu option. Some settings, e.g. display brightness and buzzer/keypad volume, are selected using a bar chart.
This symbol and a fault code will appear if a fault occurs. The strength of the WiFi connection is shown under Settings | Miele@home | Connection status Symbols represent the connection strength in increments from strong to not connected.
When you connect the machine to the : the display is dark when the mains power, the following message machine is switched off. will appear in the display: Miele - Night dimming : the time and the date Willkommen are displayed from 5:00 to 23:00.
Push the holder back into position The setting is now saved. and replace the cover. Miele@home communication enabled The next time the coffee machine is household appliance will appear in the switched off, the descaling cartridge display.
Before using for the first time Set up the bean system After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers. ...
Before using for the first time Any remaining drinks which have not been selected will be allocated to the third bean type. You have set up the bean system and you can now prepare drinks. To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of...
Tip: If you want to allocate another type If you have created additional Profiles of bean to a coffee drink, you can also with coffee drinks to the Miele do this under Change parameters (see standard profile, the bean types can “Parameters - Type of beans”).
Filling the water container If the water container is not inserted Risk to health due to correctly (e.g. sits too high or at an contaminated water. angle), water can leak from the outlet Bacteria can develop in water which valve.
Switching on and off Switching the coffee machine Switching the coffee machine Touch the On/Off sensor . Touch the On/Off button . The machine heats up and rinses the If coffee has been dispensed, the coffee pipework. Hot water will run out of the machine will rinse the coffee pipework central spout.
Spout adjustment Switching the spout The central spout cannot be manually adjustment on and off adjusted. Start in the Drinks menu. Before making the drink, the central spout moves down and the cup sensor Touch . stops it at the optimum height for the ...
Cup heating Pre-heating cups Danger of overheating due to insufficient ventilation. If the coffee machine is not sufficiently ventilated, the appliance can overheat. Ensure that there is sufficient ventilation around the coffee machine, e.g. do not cover cups on the cup heating surface with a tea towel.
Making coffee with and without milk The following drinks with milk can be Danger of burning and scalding made: on the dispensing spouts. - Ristretto is a strong, concentrated The liquids and steam dispensed are espresso. It is prepared with the very hot and can cause scalding.
Making coffee with and without milk Select a drink. The shorter extraction time means that fewer unwanted aromas and bitter Two portions of the drink will be compounds will be released. dispensed. DoubleShot will appear while drinks are Coffee pot: making several being made.
Making coffee with and without milk Making coffee drinks with ground coffee You can make coffee using ready ground coffee. This allows you to make a decaffeinated coffee if the bean container is already filled with regular coffee beans, for example. To do this, fill the ground coffee drawer with ground coffee.
Making coffee with milk The following drinks with milk can be Danger of burning and scalding made: on the dispensing spouts. - Cappuccino consists of approx. The liquids and steam dispensed are 2 thirds milk froth and 1 third very hot and can cause scalding. espresso.
Making coffee with milk You can prepare milk with the milk siphon or milk flask. There is one connecting piece included in the scope of delivery which can be Open the milk carton and dip the milk inserted either into the milk siphon or siphon into the milk.
Making coffee with milk The milk flask Milk is not cooled in the milk flask. For high-quality milk froth, always use cold milk (< 10 °C). Place the milk flask next to the coffee machine. Insert the milk pipe into the lid of the milk flask and connect the flask to the coffee machine by attaching the pipe to the aperture in the central spout.
The respective dispensing temperatures as normal. An audible tone will sound are recommended by Miele for making after the brewing time has elapsed. black tea, green tea, herbal or fruit tea. If you have switched off audible tones,...
Starting the TeaTimer : the TeaTimer is not displayed. TeaTimer appears in the bottom left of Select the setting you want and the display. confirm with OK. TeaTimer Making tea The hot water spout is located to the Touch TeaTimer right of the central spout.
The teapot will be filled. You can follow the process in the display. You can interrupt preparation at any time: Touch Cancel...
Dispensing hot water Danger of burning and scalding on the hot water spout! The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.
Parameters You can individually adjust the following - espresso or coffee flows into the cup parameters for each drink: too quickly, - Ground quantity - the crema is very pale and uneven, - Brewing temperature - the espresso or coffee lacks body. - Pre-brewing Increase the amount of coffee so that more ground coffee is brewed.
Parameters You can set a short or long duration for pre-brewing or turn the “Pre-brewing” function off completely. Type of beans You can display which type of bean is saved for the coffee drink or change the allocation. Grinder setting When the beans are ground correctly, ...
Portion size When the cup is filled to the level you The flavour of the coffee produced depends not only on the type of coffee, want, touch Save but also on the amount of water used. If the maximum amount is reached, You can programme the amount of preparation stops and the maximum water for all coffee drinks, tea and hot...
Resetting drinks You can reset portion sizes and Resetting all drinks parameters individually or for all drinks Touch Reset all drinks back to their factory default setting. Reset all drinks to default settings? will Start in the Drinks menu. appear in the display.
Profiles In addition to the Miele drinks menu - Delete profile if you want to delete a (Miele profile), you can enter up to 10 profile. individual profiles to cater for different - Change profile to set whether the tastes and preferences.
Profiles - When switched on: Each time the machine is switched on it will automatically select the Miele drinks menu regardless of which profile was set before the machine was last switched off. Select the required option and touch...
Profiles: creating and processing drinks Touch You can save frequently made drinks in Change drink a profile with your own individual Select a drink. settings (see “Profiles”). You can now either change the portion You can also change the names of your size(s), drinks parameters or the names drinks and delete any unwanted drinks as described.
Profiles: making drinks Start in the Drinks menu. Touch Profiles Select the profile you want. The name of the profile selected will be shown in the top left of the display. Now you can make the drink you want. ...
Expert mode In Expert mode you can change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink. Dispensing Expert mode is not available if you have selected or two DoubleShot portions .
Settings You can use the “Settings” menu to Changing and saving settings customise the coffee machine to suit Start in the Settings menu. your requirements. Select the option you want to Some settings which can be found in change.
Settings Possible setting options The factory default for each option has a * next to it. Option Available settings , English and other languages Language deutsch Location Time Show Night dimming Clock format 24 h 12 h (am/pm) Date Timer Timer 1 Switch on at...
Settings Option Available settings Lighting Machine switched on Set the brightness Machine switched off Brightness Switch off after Type of beans Type A Change name Change allocation Type B Change name Change allocation Type C Change name Change allocation Info Number of drinks Total no.
Settings Option Available settings Miele@home Set up If Miele@home is set up: Deactivate Activate Set up again Connection status If Miele@home is set Remote control If Miele@home is set RemoteUpdate Service Evaporate Demo mode Factory default Appliance settings Reset Do not reset...
If the coffee machine has been connected to a WiFi network and is You can select the language (and signed into the Miele@mobile app, the location variant of that language) for all time will be synchronised based on display text.
Settings When all required days of the week Switch on at are marked, touch OK. The coffee machine will not switch on at the required time if you have Activating and deactivating the timer activated the system lock. If you have selected Night dimming The timer settings are deactivated.
Settings Water hardness °dH mmol/l Set- (mg/l CaCO ting* If a descaling cartridge is not fitted 0–8.4 0–1.5 0–150 Soft 1 and you descale the coffee machine 8.4–14 1.5–2.5 150–250 Medium 2 using descaling tablets, the machine should be set to the local water 14–21 2.5–3.8 250–375...
Appliance settings again. The following will not be reset: * This menu option appears if Miele@home has been set up and the - The number of drinks and the coffee machine has – where applicable appliance status (No. of portions –...
Settings Network configuration The settings for the WiFi network will be reset. The network configuration should be reset whenever the coffee machine is being disposed of or sold, or if a used coffee machine is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the coffee...
Make sure that the signal of your WiFi Select the connection method network is sufficiently strong in the place where you want to set up your Start the Miele@mobile app and coffee machine. following the instructions in the app. Start in the Settings ...
, the With MobileStart you can start making a option must be switched Remote control drink, for example, via the Miele@mobile app. Start in the menu. Drinks Danger of burning and scalding Touch . on the dispensing spouts.
However, Miele recommends installing updates. - Some software updates can only be carried out by the Miele Customer Activating/deactivating Service Department. The RemoteUpdate function is activated by default. Available updates...
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly. Overview of cleaning intervals Recommended frequency What do I have to clean/maintain?
Cleaning and care Cleaning by hand or in the Risk of damage as a result of dishwasher excessively high dishwasher temperatures. The brew unit is not dishwasher Components may be ruined (e.g. safe. may become warped) if washed in a Clean the brew unit by hand only dishwasher at temperatures higher under warm running water.
Cleaning and care Unsuitable cleaning agents Danger of burning and scalding on hot components or by hot liquids. Contact with unsuitable cleaning Components can become very hot agents can alter or discolour the during operation. Touching hot external surfaces. All surfaces are components can cause burning.
Cleaning and care Empty the drip tray and the waste Clean the drip tray and waste container. container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning.
Cleaning and care Clean the inside of the machine Cleaning the drip tray cover underneath the drip tray. Remove the drip tray cover. Replace the waste container, the lid The drip tray cover can be cleaned in and the lower panel before pushing the dishwasher, or by hand using the drip tray back into the coffee...
Cleaning and care Cleaning the water container Clean the water container every day. You can clean the water container in the dishwasher once a week. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean.
Cleaning and care Cleaning the central spout with integrated Cappuccinatore With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher at least once a week. This will remove coffee deposits and milk residues effectively.
Cleaning and care Removing and cleaning the cup sensor The cup sensor is located under the central spout. Clean the cup edge sensor daily by hand with warm water and a little washing-up liquid. Clean the surfaces of the central spout with a damp cloth.
Cleaning and care Cleaning the milk siphon Clean the milk siphon every day. Rinse the milk siphon under running water. Remove the connecting piece from the stainless steel tube. Clean the individual components in a dishwasher. Tip: Alternatively, you can soak the individual components overnight in water and washing-up liquid.
Clean the milk pipework on the bean containers. maintenance programme together with the Miele Cleaning agent for milk Remove the lid of each bean pipework (see “Cleaning the milk container. pipework”).
Cleaning and care Tip: Open one lid at a time to prevent Vacuuming out the ground mixing of bean types when filling the coffee chute bean system. In order to remove coffee residues properly from the grinder channel, you Ground coffee drawer cleaning should vacuum out the ground coffee Clean the ground coffee drawer and chute once a year with the vacuum...
Tip: You can also clean the appliance not prompt mandatory cleaning at an casing with the Miele all purpose inconvenient time. microfibre cloth. Please note that each maintenance programme must be carried through to the end and cannot be cancelled.
Cleaning and care Rinsing the machine Rinsing the milk pipework After a coffee has been dispensed, the The milk pipework can become blocked machine is rinsed before it switches off. by milk residues. The milk pipework This removes any residual coffee. should therefore be rinsed regularly.
Miele coffee machines and prevents subsequent damage. It is available to order via the Miele webshop, the Miele Customer Service Department (see the end of this booklet for contact details) or from your Miele ...
These The maintenance programme will then have been specially developed for start. degreasing the brew unit in Miele coffee Follow the instructions in the display. machines and prevent subsequent damage. Cleaning the brew unit and interior...
Cleaning and care Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made. Risk to health due to inadequate cleaning Damp coffee residues in the interior of the machine can go mouldy and pose a risk to health.
Cleaning and care Descaling the machine Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent immediately. Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will ...
Miele descaling tablets are available to You can switch the coffee machine off if order via the Miele webshop, from the you do not want to carry out the Miele Customer Service Department descaling programme at this point in (see the end of this booklet for contact time.
Cleaning and care Follow the further instructions given in the display. When Rinse the water container and fill it to the symbol with fresh tap water appears in the display: Remove the water container and rinse it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container.
Please note before and during maintenance programme for descaling the machine. For automatic descaling, a automatic descaling: Miele descaling cartridge is fitted at the The coffee machine must be ready to back of the coffee machine. The coffee use and the following conditions must...
Automatic descaling The descaling cartridge is available to The Miele descaling cartridge order from the Miele online shop or Only use the Miele descaling directly from Miele (see back cover for cartridge for the automatic descaling contact details). programme. If a descaling cartridge is not fitted, an...
Automatic descaling Fitting and removing a descaling cartridge Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. When handling a cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces.
Automatic descaling Set the start time for automatic The cap is located on the cartridge. descaling (Descaling timer) Release it by snapping it off. You can set the daily start time for Dispose of the spent cartridge with automatic descaling as you wish. The your household waste.
Automatic descaling Switching off automatic descaling If you remove the descaling cartridge, automatic descaling is deactivated. You will then descale manually using the Descale the machine maintenance programme. To do this, the appropriate descaling agent is required (see “Cleaning and care - Descaling the machine”).
Follow the instructions which appear in the display to remedy the problem. If after this, the fault message appears in the display again, contact Miele Service. Problem Cause and remedy F1, F2, There is an internal fault.
Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly. Check the brew unit Switch the machine off with the On/Off sensor. Remove the brew unit and clean it by hand. Push the coffee ejector of the brew unit into the correct position.
Problem solving guide Problem Cause and remedy F233 The cup sensor is not inserted or is incorrectly inserted. The stainless steel cover of the central spout was not fitted properly, e.g. is tilting forwards slightly. If the central spout is moving upwards and the cup sensor is bumped, e.g.
The fuse has tripped because the coffee machine, voltage, or another appliance is defective. Switch off at the wall socket and remove the plug. Contact a qualified electrician or Miele. The coffee machine The factory set switch-off time (20 minutes) or the turns off suddenly.
Problem solving guide Problem Cause and remedy The coffee machine The system lock has been activated. does not switch itself Deactivate the system lock. on, although the Switch A day of the week has not been selected and/or the on at setting has been timer has not been activated.
Problem solving guide Problem Cause and remedy Fill and refit the water con- The descaling cartridge is not fitted. The coffee appears after machine needs descaling. tainer switching on even Switch the machine off with the On/Off sensor. though the container is Wait approx.
Problem solving guide Problem Cause and remedy The waste container is The drip tray has probably been removed without the overflowing even waste container being emptied. though the drip tray and Removing the drip tray resets the internal counter for waste container have emptying the waste container.
Problem solving guide Problem Cause and remedy Neither milk nor milk The milk pipework is blocked. froth comes out of the Clean the central spout and milk pipework central spout. carefully with the brush. A fan can be heard even This is not a fault.
Problem solving guide Unsatisfactory results Problem Cause and remedy The coffee is not hot The cup has not been pre-heated. enough. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cups, e.g. using the cup heating (depending on model).
Problem solving guide Problem Cause and remedy The crema on the cof- The grinder setting is not correct. fee or espresso is not Set the grinder to a finer or coarser setting. as it should be. The brew temperature is too high for the type of coffee being used.
In the event of any faults which you For information on the appliance cannot remedy yourself, please contact warranty specific to your country please your Miele dealer or the Miele Customer contact Miele. See back cover for Service Department. address.
Transporting the machine Select If you are not going to use the coffee Settings and then Service machine for an extended period of time, Select Evaporate and then e.g. whilst on holiday, or if it needs to be moved, a number of procedures will ...
Transporting the machine When the display goes out, the Packing the machine machine has finished evaporating. The coffee machine should only be Clean the drip tray and waste packed when it is clean and dry. container. Residues of coffee grounds can cause scratches on surfaces.
- CJ Jug 1.0 l Insulated flask for coffee or tea (pot function) - Miele Black Edition ONE FOR ALL Whole coffee beans – perfect for making Espresso, Café Crema and speciality coffees with milk - Miele Black Edition ESPRESSO Whole coffee beans –...
Saving energy The following tips can help you save energy and money as well as care for the environment: - Operate the coffee machine in “Eco mode” (default setting). - Select dimmer lighting or abstain from using lighting when the appliance is switched on.
Electrical connection Before connecting the coffee machine, The coffee machine must not be used make sure that the connection data on with “energy saving plugs”. These the data plate (voltage and frequency) reduce the amount of energy supplied matches the mains electricity supply. to the machine, causing it to overheat.
Technical data Electricity consumption in standby: < 0.4 W Electricity consumption in < 0.9 W networked standby: Pump pressure: Max. 15 bar Through-flow heater: 1 stainless steel thermo block Dimensions (W x H x D): 311 x 420 x 445 mm Net weight: 14.2 kg Connection cable length: 120 cm Water container 2.2 l capacity: Total capacity of bean containers: Approx. 540 g Coffee bean container A: Approx. 150 g...
Conformity declaration Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk/domestic/...
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: firstname.lastname@example.org Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...