Miele CM7500 Quick Start Manual

Cleaning and care
ĺ
Cleaning the central spout with Dry the funnel to prevent ground coffee
Make sure that all parts are tightly
sticking to it the next time a coffee is
integrated cappuccinatore connected to one another.
ĺ prepared.
ĺ
Push the dispensing unit back into the
If the central spout is in the uppermost
Carefully clean the inside of the coffee
central spout and replace the stainless
position it cannot be dismantled. The machine.
ĺ
central spout must be moved into the steel cover.
ĺ
Push the brew unit back into the coffee
maintenance position to do this. Touch "OK".
ĺ machine, making sure it goes in straight.
Touch  for three seconds.
Cleaning the brew unit by hand
Clean the brew unit by hand only
under hot running water. Do not use
washing-up liquid or any other
cleaning agent..
ĺ
Open the machine.
ĺ
ĺ Press the button under the handle on the
brew unit  and, whilst doing so, turn
Pull the stainless steel cover forwards
the handle anti-clockwise .
and off and then pull the dispensing unit
off.
Degreasing the brew unit
After 200 portions have been dispensed,
"Degrease the brew unit" will appear in the
ĺ
Press the button under the handle of the display. This message will not go out until
brew unit  and, whilst doing so, turn
the brew unit has been degreased.
the handle clockwise .
ĺ You need 1 Miele cleaning tablet to
Carefully pull the brew unit out of the degrease the brew unit. The process takes
coffee machine. approx. 12 minutes.
When you have removed the brew
The cleaning process cannot be
ĺ Twist upper section  with the holder
unit, do not change the position of the
cancelled once it has started. The
handle on the brew unit. process has to be carried through to the
for the milk pipework and pull it off.
Then pull Y-shaped piece  off. Release
end.
spouts .
ĺ
Select "Maintenance" from the main
ĺ
Clean all parts thoroughly. menu and then "Degrease the brew unit"
ĺ
The maintenance programme will then
Clean the surfaces of the central spout
with a damp cloth. start.
ĺ
Tip: if necessary clean the milk pipework Follow the instructions in the display.
under running water with the brush
supplied.
ĺ
Reassemble the dispensing unit. Push the spouts  firmly back onto the ĺ
Wipe any remaining coffee off the filters
dispensing unit. (see arrows). One filter is located in the
funnel and the other to the left of the
funnel.
Tips for use
Drinks parameters Portion size
When " Place a cleaning tablet in the ground
coffee drawer and then close it " appears in
You can set the amount of coffee, the You can adjust the amount of water for all
the display:
ĺ brewing temperature and pre-brewing for coffee drinks, hot water and all types of
Open the machine. each drink individually. tea.
ĺ
Select " Process" from the drinks menu For coffee drinks with milk you can also
using the  arrow sensor. set the amount of milk or milk froth to suit
ĺ
your personal taste.
Touch " Change drink" and select a drink. ĺ
ĺ
Place the cup you want under the
Touch " ".
Drink parameters
ĺ
central spout or hot water spout.
Select " Amount of coffee ", " Brew ĺ
Select " Process " with the  arrow
temperature " or " Pre-brewing ".
ĺ
sensor.
Select the setting you want and touch ĺ
Touch " " and select a drink.
" . Change drink
OK" ĺ
ĺ
ĺ Touch " Portion size ".
Touch " OK " again to save your changed
Turn the handle to the left to remove the
settings. The drink will be made and "
ground coffee drawer.
ĺ appear in the display as soon as the
Place the cleaning tablet in the
minimum dispensing amount is reached.
ĺ
integrated coffee scoop and push the
When the cup is filled to the level you
ground coffee drawer into the ground
want, touch " Save ".
coffee chute. Turn the handle to the right
to close the ground coffee chute. If you want to change the portion size for
ĺ
coffee drinks made with milk or hot water,
Follow the further instructions given in
the ingredients (components) which make
the display.
up the drink will be saved one after the
other while the drink is being made.
.
Settings
Profiles Expert mode Changing settings
ĺ
You can save frequently made drinks in a In Expert mode you can change the Touch .
ĺ
profile with your own individual settings amount of coffee and the portion size
Select " Settings
ĺ
(see "Profiles"). while the drink is being made.
ĺ Select the option you want and change
Select " Profiles " from the main menu. The setting will not be saved and will only
the setting as required.
apply for the current drink.
Creating a profile
Activate Expert mode from the " Settings "
ĺ
menu.
Select " Create Profile ".
Option
ĺ
The parameters can only be changed
Enter the name you want (max. 8
Language
when the respective ingredient is being
characters) and then touch " Save ".
processed while the drink is being
made. Time
Processing profiles
When you have created at least one profile
Date
you can choose from the following options
Save " will
under " Process ": Timer
Grinding
– Change name
– Delete profile
Expert mode
– Change profile
Eco mode
Creating and processing drinks in a Descaling
DoubleShot Cancel
profile
ĺ
ĺ Lighting
Touch the segments and adjust the
Touch " Create drink" and select a drink.
ĺ
indicator (small triangle) as you wish.
Change the portion size or drink
parameters. Info
ĺ
Enter a name for the new drink
System lock
(maximum 8 characters) and touch
Water hardness
" Save ".
Brightness
When you have created at least one drink
you can choose from the following options
Volume
under " Process drink " :
– Change drink
Cup heating
(portion size, drink parameters and
name) Spout adjustment
– Delete drink Service
Factory default
ĺ
Touch " OK " to save the setting.
Tip: touch  to return to the previous
".
menu.
Available settings Notes
Deutsch, English and other languages
If you select the wrong language by mistake, you can easily find the Language
Country flag symbol .
Show (Off / On / Night dimming) Your choice of display will affect the energy consumption of your coffee machine. Information about
Clock format (12 h / 24 h) this will appear in the display.
Timer 1 (Switch on at, Switch off at, For "Switch on at" and "Switch off at", the timer must be activated and at least one day of the week
Switch off after) must be allocated.
Timer 2 (Switch on at, Switch off at)
On / Off
On / Off
Descaling method ( automatic/ manual)
If you select " Automatic descaling " the " Start time " will be displayed.
Brightness
(Machine switched on or switched off)
Switch off after
On / Off When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
Soft, Medium, Hard, Very hard The water hardness level only needs to be set for manual descaling.
Buzzer tones
Keypad tones
On / Off
On / Off The height of the central spout cannot be adjusted manually.
Evaporate
The " Evaporate " function removes water from the system and should be used if the machine is not
going to be used for a long period of time or has to be moved.
Demo mode Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for
domestic use!
The following settings will not be reset: Language, Time, Date, Number of drinks dispensed or
Descaling method.
Quick Start Guide
Coffee machine
option by following the
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to read the operating and installation instructions to
familiarise yourself with how to use the coffee machine before using it for the first
time. Please pay particular attention to the Warning and Safety instructions.
en - GB
M.-Nr. 10 315 270