Miele CM7550 Quick Start Manual

Cleaning and care
Cleaning the central spout Degreasing the brew unit The following message will appear in the
display: Fit the brew unit with a tablet in it.
If the central spout is in the uppermost You need 1 Miele cleaning tablet to
position it cannot be dismantled. The degrease the brew unit. The process takes
central spout must be moved into the approx. 12 minutes.
maintenance position to do this.
The message Degrease the brew unit will
ĺ
Press the  control for 3 seconds. appear in the display.
ĺ
Touch OK.
The maintenance programme will then
start.
ĺ
Follow the instructions in the display.
ĺ
Clean the brew unit by hand under Push the brew unit back into the coffee
warm running water. Do not use machine.
ĺ
cleaning agent.
Lock the brew unit. Press and hold the
ĺ
button under the brew unit handle and,
Open the machine door.
ĺ ĺ whilst doing so, turn the handle to the
Carefully pull the stainless steel cover off Release the brew unit. Press and hold
right.
the button under the brew unit handle ĺ
and then pull the dispensing unit off.
Close the machine door.
and, whilst doing so, turn the handle to
ĺ
the left . Follow the further instructions given in
ĺ
the display.
Carefully pull the brew unit out of the
coffee machine. The cleaning process is finished at the end
of the rinsing cycle.
When you have removed the brew
"Descale the machine"
unit, do not change the position of the
handle on the brew unit. maintenance programme
ĺ
Clean the brew unit by hand under
Risk of damage from descaling
warm running water.
solution.
ĺ
Sensitive surfaces and/or natural floors
Twist off the upper section with the
holder for the milk pipework  and pull
can suffer damage.
it off. Then pull the Y-shaped piece  Wipe up any spillages of descaling
off. Remove the dispensing spouts .
agent immediately.
ĺ
Clean all parts thoroughly. Clean the You need 1 descaling tablet for the
surfaces of the central spout with a descaling process. The process takes
damp cloth. approx. 12 minutes.
ĺ
Fit the dispensing unit back together.
The message Descale the machine appears
ĺ
ĺ in the display.
Push the dispensing unit back into the
ĺ
Wipe any remaining coffee off the two
central spout and replace the stainless Touch OK.
filters (see arrows).
ĺ
steel cover.
ĺ The maintenance programme will then
Dry the funnel in the brew unit.
Touch OK. ĺ
start.
ĺ
Carefully clean the inside of the coffee
Follow the instructions in the display.
machine.
Tips for use
Drink parameters Portion size
You can set the amount of coffee, the You can adjust the amount of water for all
brewing temperature and pre-brewing for coffee drinks, hot water and all types of
each drink individually. tea and the amount of milk for drinks with
ĺ
milk.
Select Process from the drinks menu
ĺ
using the  arrow sensor. Place the cup you want under the
ĺ
central spout or hot water spout.
Touch Change drink and select a drink. ĺ
ĺ
Select using the  arrow sensor.
Touch . Process
Drink parameters ĺ
ĺ ĺ
Fill the water container to the Descaling Touch Change drink and select a drink.
Select Amount of coffee , Brew temperature
ĺ
symbol  symbol with lukewarm water.
or Pre-brewing . Touch Portion size .
ĺ
ĺ
Place 1 descaling tablet in the water.
Select the setting you want and The drink will be made and Save
ĺ
touch OK. appear in the display as soon as the
Push the water container back into the
ĺ
appliance. minimum dispensing amount is reached.
Touch OK again to save your changed
ĺ ĺ
Follow the further instructions given in settings. When the cup is filled to the level you
the display. want, touch Save .
ĺ
If you want to change the portion size for
When Rinse the water container and fill it to
coffee drinks made with milk or hot water,
the  symbol with fresh tap water appears
in the display: the ingredients which make up the drink
ĺ
will be saved one after the other while the
Remove the water container and rinse
drink is being made.
it thoroughly with clean water. Fill the
water container to the descaling symbol
 with fresh tap water.
The descaling process is complete at the
end of the rinsing process.
Settings
Profiles Expert mode Changing settings
ĺ
You can set up profiles and individual In Expert mode you can change the Touch the  control.
ĺ
drinks to cater for different tastes and amount of coffee and the portion size
Select Settings .
ĺ
preferences. while the drink is being made. To do
Select the option you want and change
this Expert mode must be switched on
the setting as required.
Creating a profile Settings (  | Expert mode ).
ĺ
Select Profiles followed by Create profile .
The parameters can only be changed
ĺ
when the respective ingredient is being
Enter the name you want (max. 8
Option
processed while the drink is being made.
characters) and then touch Save .
Language
The setting will not be saved and will only
Processing a profile
apply for the current drink.
will
Time of day
When you have created at least one profile
you can choose from the following options
under Process : Date
– Change name Timer
Grinding
– Delete profile
– Change profile
Creating and processing drinks in a
DoubleShot Cancel Expert mode
profile
ĺ ĺ
Eco mode
Touch Create drink and select a drink. Touch the segments and adjust the
ĺ
indicator (small triangle) as you wish. Lighting
Change the portion size or drink
parameters.
ĺ
Enter a name for the new drink
(maximum 8 characters) and touch Save. Info
When you have created at least one drink System lock
you can choose from the following options
Water hardness
under Process drink :
Brightness
– Change drink
(portion size, drink parameters and
Volume
name)
– Delete drink Cup heating
Spout adjustment
Miele@home
Service
Factory default
ĺ
Touch OK to save the setting.
Tip: touching  takes you back to the
previous menu.
Available settings Comments
deutsch, english and other languages
If you select the wrong language by mistake, you can easily find the Language option by following the
Country flag symbol .
Show (Off / On / Night dimming) Your choice of display will affect the energy consumption of your coffee machine.
Clock format (12 h / 24 h)
Timer 1 (Switch on at, Switch off at,
For Switch on at and Switch off at the timer must be activated and at least one day of the week must be
Switch off after)
allocated.
Timer 2 (Switch on at, Switch off at)
TeaTimer (On / Off)
Descaling timer
On / Off
On / Off
Brightness
(Machine switched on or switched off)
Switch off after
On / Off
When the system lock is activated, the Switch on at option for the timer cannot be selected.
soft, medium, hard, very hard
Audible tones
Keypad tones
On / Off
On / Off The height of the central spout cannot be adjusted manually.
Setup Further functions can be taken advantage of if the coffee machine is connected to a WiFi network, and
is signed into the Miele@mobile App (see operating instruction manual).
Evaporate
The Evaporate function removes water from the system and should be used if the machine is not going
to be used for a long period of time or has to be moved.
Demo mode Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for domestic
use.
Appliance settings Language, Time, Date, Number of drinks and Profiles cannot be reset.
Network configuration
Quick Start Guide
Coffee machine
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to familiarise yourself with the coffee machine
before using it for the first time. Please read the operating instruction manual
carefully and pay particular attention to the Warning and Safety instructions.
en - GB
M.-Nr. 10 973 560