Unpacking And Installing; Unpacking The Coffee Machine; Accessories Supplied; Installing And Connecting The Coffee Machine - Miele CM 7750 Operating Instructions Manual

Unpacking and installing

Unpacking the coffee machine

 Unpack the coffee machine.
 Remove any protective foil and
stickers from the machine. Exception:
Please do not remove any labels (e.g.
the data plate) which are visible when
you pull out the lower panel.
Useful tip: Please retain the original
box and polystyrene pieces so that you
can pack the machine securely, should
you need to transport it in the future.
The drip tray cover can be found in the
accessories pack.
 Remove the protective foil from the
drip tray cover and place the drip tray
cover into the lower panel.

Accessories supplied

The following accessories are included
with your coffee machine:
– Stainless steel milk flask MB CM
(capacity 0.5 l)
– Cleaning tablets for degreasing the
brew unit
– Miele descaling tablets
– Miele descaling cartridge
– Cleaning brush
20
– Vacuum cleaner attachment for
cleaning coffee chute
Installing and connecting the
coffee machine

Danger of overheating due to
insufficient ventilation.
If the coffee machine is not
sufficiently ventilated, the appliance
can overheat.
Ensure that there is sufficient
ventilation around the coffee
machine.
Do not cover the coffee machine
with tea towels etc. while it is in use.
If the coffee machine is installed in a
niche, heat and moisture will
accumulate inside the niche. This
can result in damage to the coffee
machine and/or furniture unit.
Do not install the appliance in a
niche.
Please observe the following installation
instructions:
– The location of the machine must be
dry and well ventilated.
– The ambient temperature of the room
in which the machine is used must be
between +16 °C and +38 °C.
– Do not place the coffee machine near
a window in direct sunshine or right
next to an appliance that gives off
heat. These would subject the
machine to ambient temperatures
outside its permitted operating range.