–
On
: the
TeaTimer
the hot water is being prepared. The
can be started after
TeaTimer
preparation.
–
: the TeaTimer is not displayed.
Off
Select the setting you want and
confirm with OK.
Making tea
The hot water spout is located to the
right of the central spout.
Use the arrow sensor to display and
select the types of tea. Different types
of tea can be found in the drinks menu
after
Milk froth
.
The
menu is shown in the display.
Drinks
Pour loose tea into a tea filter or
similar or take a tea bag from the
packet.
Place the tea filter or the tea bag in
the tea cup.
Place the cup under the hot water
spout.
Select the type of tea you want from
the display.
Hot water will be dispensed into the
cup.
is displayed while
You can now start the minute minder for
brewing time if the TeaTimer is switched
on.
Starting the TeaTimer
TeaTimer
appears in the bottom left of
the display.
TeaTimer
Touch
TeaTimer
TeaTimer will be selected. After
dispensing, the editor will open with a
suggested time.
Adjust the brewing time if necessary
and touch OK.
An audible tone will sound after the
brewing time has elapsed.
Now remove the tea leaves or the tea
bag.
Cancelling tea preparation
Touch
Stop
or
Cancel
Teapot: making several cups of
tea one after the other
You can make several cups of tea one
after the other automatically with the
Teapot
function (max. 1 litre), e.g. to fill a
tea pot. Up to eight cups can be made
in this way.
The
Drinks
menu is shown in the display.
Place the tea or teabag in a suitably
sized teapot.
Place the teapot under the hot water
spout.
Select
Teapot
.
Select the type of tea you want.
.
.
Tea
45