Miele CM7300 Quick Start Manual

Cleaning and care
ĺ
Cleaning the central spout with Dry the funnel to prevent ground coffee
Make sure that all parts are tightly
sticking to it the next time a coffee is
integrated cappuccinatore connected to one another.
ĺ made.
ĺ
Push the dispensing unit back into the
If the central spout is in the uppermost
Carefully clean the inside of the coffee
central spout and replace the stainless
position it cannot be dismantled. The machine.
ĺ
central spout must be moved into the steel cover.
ĺ
Push the brew unit back into the coffee
maintenance position to do this. Touch "OK".
ĺ machine, making sure it goes in straight.
Touch  for three seconds.
Cleaning the brew unit by hand
Clean the brew unit by hand only
under hot running water. Do not use
washing-up liquid or any other
cleaning agent..
ĺ
Open the machine.
ĺ
ĺ Press the button under the handle on the
brew unit  and, whilst doing so, turn
Pull the stainless steel cover forwards
the handle anti-clockwise .
and off and then pull the dispensing unit
off.
Degreasing the brew unit
You need 1 Miele cleaning tablet to
degrease the brew unit. The process takes
ĺ
Press the button under the handle of the approx. 12 minutes.
brew unit  and, whilst doing so, turn
The cleaning process cannot be
the handle clockwise .
ĺ
cancelled once it has started. The
Carefully pull the brew unit out of the
process has to be carried through to the
coffee machine.
end.
ĺ
When you have removed the brew
Select "Maintenance" from the main
ĺ Twist upper section  with the holder
unit, do not change the position of the
menu and then "Degrease the brew unit"
handle on the brew unit.
for the milk pipework and pull it off. The maintenance programme will then
Then pull Y-shaped piece  off. Release
spouts . start.
ĺ
ĺ Follow the instructions in the display.
Clean all parts thoroughly.
ĺ
Clean the surfaces of the central spout
with a damp cloth.
Tip: if necessary clean the milk pipework
under running water with the brush
supplied.
ĺ
Reassemble the dispensing unit. Push the spouts  firmly back onto the ĺ
Wipe any remaining coffee off the filters
dispensing unit. (see arrows). One filter is located in the
funnel and the other to the left of the
funnel.
Descaling the machine
You will need one descaling tablet to
When " Place a cleaning tablet in the ground When "Rinse the water container and fill with
descale the machine. The maintenance
coffee drawer and then close it " appears in fresh water to the  symbol"
programme lasts for approx. 12 minutes.
the display: display:
ĺ ĺ
" Descale the machine " appears in the
Open the machine. Remove the water container and rinse
display.
it carefully with clean water. Make sure
ĺ
Touch "OK". that no descaling agent is left in the
ĺ
water container.
Or select " Maintenance " from the main
Fill the water container to the  symbol
menu and then select " Descale the
with fresh tap water.
".
machine
The descaling process is finished at the
The descaling process cannot be
end of the rinsing process.
cancelled once it has started. The
process has to be carried through to the
end.
ĺ
Turn the handle to the left to remove the The maintenance programme will then
ground coffee drawer. start.
ĺ ĺ
Place the cleaning tablet in the
Follow the instructions in the display.
integrated coffee scoop and push the
When "Fill water container with lukewarm
ground coffee drawer into the ground
water and descaling solution up to the 
coffee chute. Turn the handle to the right
symbol and replace it " appears in the
to close the ground coffee chute.
ĺ display:
Follow the further instructions given in
the display.
ĺ
Fill the water container up to the
.
 symbol with lukewarm water and
drop a descaling tab into the water.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water container with too
much or too little water. Otherwise the
descaling process will be cancelled
prematurely.
ĺ
Replace the water container.
ĺ
Follow the instructions in the display.
Tips for use Settings
Drinks parameters Expert mode Changing settings
ĺ
appears in the
You can set the amount of coffee, the
In Expert mode you can change the Touch .
ĺ
brewing temperature and pre-brewing for
amount of coffee and the portion size
Select " Settings
each drink individually. ĺ
while the drink is being made.
ĺ
Select the option you want and change
Select " Process" from the drinks menu
The setting will not be saved and will only
the setting as required.
using the  arrow sensor.
apply for the current drink.
ĺ
Touch " Change drink" and select a drink.
ĺ Activate Expert mode from the " Settings "
Touch " ". menu.
Drink parameters
ĺ Option
Select " Amount of coffee ", " Brew The parameters can only be changed
Language
temperature " or " Pre-brewing ". when the respective ingredient is being
ĺ
processed while the drink is being made.
Select the setting you want and touch
Time of day
" .
OK"
ĺ
Touch " OK " again to save your changed
Date
settings.
Timer
Grinding
Portion size
You can adjust the amount of water for all
Expert mode
coffee drinks, hot water and all types of
Eco mode
tea.
DoubleShot Cancel
Lighting
For coffee drinks with milk you can also ĺ
Touch the segments and adjust the
set the amount of milk or milk froth to suit
your personal taste. indicator (small triangle) as you wish.
ĺ
Place the cup you want under the Info
central spout or hot water spout.
System lock
ĺ
Select " Process " with the  arrow
Water hardness
sensor.
ĺ
Brightness
Touch " Change drink " and select a drink.
ĺ
Volume
Touch " Portion size ".
The drink will be made and " Save " will
Cup heating
appear in the display as soon as the
minimum dispensing amount is reached. Spout adjustment
ĺ
When the cup is filled to the level you Service
want, touch " Save ".
If you want to change the portion size for
coffee drinks made with milk or hot water,
the ingredients (components) which make Factory default
up the drink will be saved one after the
other while the drink is being made.
ĺ
Touch " OK " to save the setting.
Tip: touch  to return to the previous
".
menu.
Available settings Notes
Deutsch, English and other languages
If you select the wrong language by mistake, you can easily find the Language
Country flag symbol .
Show (Off / On / Night dimming) Your choice of display will affect the energy consumption of your coffee machine. A message about
Clock format (12 h / 24 h) this will appear in the display.
Timer 1 (Switch on at, Switch off at, For "Switch on at" and "Switch off at", the timer must be activated and at least one day of the week
Switch off after) must be allocated.
Timer 2 (Switch on at, Switch off at)
On / Off
On / Off
Brightness
(Machine switched on or switched off)
Switch off after
On / Off When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
Soft, Medium, Hard, Very hard The water hardness level only needs to be set for manual descaling.
Buzzer tones
Keypad tone
On / Off
On / Off The height of the central spout cannot be adjusted manually.
Evaporate
The " Evaporate " function removes water from the system and should be used if the machine is not
going to be used for a long period of time or has to be moved.
Demo mode Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for
domestic use!
The following settings will not be reset: Language, Time, Date and Number of drinks dispensed.
Quick Start Guide
Coffee machine
option by following the
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to read the operating and installation instructions to
familiarise yourself with how to use the coffee machine before using it for the first
time.
en - GB
M.-Nr. 10 315 210