Cleaning The Stainless Steel Milk Flask; Cleaning The Milk Pipework Manually Or Using The Maintenance Programme - Miele CM 7550 Operating Instructions Manual

Hide thumbs Also See for CM 7550:
Table of Contents

Advertisement

Cleaning the stainless steel
milk flask
The stainless steel milk flask should be
taken apart and cleaned every day.
 Clean all parts by hand only using
hot water and a little washing-up
liquid. Use a small cleaning brush to
remove milk residue from the milk
pipework if necessary.
 Rinse all parts thoroughly under
running water.
Residual washing-up liquid can affect
the taste of milk and the quality of the
milk froth.
 Dry all parts thoroughly.
 Reassemble the stainless steel milk
flask.
Cleaning the milk pipework
manually or using the
maintenance programme
Risk to health due to inadequate
cleaning
Milk naturally contains bacteria. Heat
and moisture inside the coffee
machine can cause these bacteria to
multiply, e.g. milk residues can go off
and pose a risk to health.
Clean all components in which milk
is transported on a regular basis.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
Cleaning and care
When you confirm the message
with OK, the internal
the milk pipework
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little washing-up liquid
(see "Cleaning the central spout with
integrated cappuccinatore").
– Or you can clean the milk pipework
using the
Clean the milk pipework
maintenance programme together
with the Miele Cleaning agent for milk
pipework (see "Cleaning the milk
pipework").
Tip: In addition to your weekly cleaning
routine we recommend carrying out the
alternative cleaning procedure once a
month. For example if you manually
clean the machine once a week, then
you should run the maintenance
programme once a month. This
combination will ensure optimum
cleaning of the milk pipework.
Clean
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents