Stainless Steel Milk Flask; Milk Pipework - Miele CM6150 Operating Instructions Manual

Cleaning and care

Stainless steel milk flask

(CM6350)
The milk flask should be taken apart
and cleaned every day.
 Clean all parts by hand only using
hot water and a little washing-up
liquid. Use the cleaning brush
supplied to remove milk residues
from the milk pipework if necessary.
 Rinse all parts carefully under running
water.
Residual washing-up liquid can affect
the taste of milk from the machine and
the quality of the milk froth.
 Dry all parts thoroughly.
 Reassemble the milk flask.
56

Milk pipework


All parts of the milk system need
to be cleaned thoroughly and
regularly. Milk contains bacteria
which proliferate rapidly with
inadequate cleaning. A dirty machine
can be harmful to health.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
When you confirm the message
milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with hot
water and a little washing-up liquid
(see "Central spout with integrated
cappuccinatore").
– Or you can clean the milk pipework
using the Clean milk pipework
maintenance programme together
with cleaning agent for milk pipework
(see "Maintenance programmes -
Cleaning the milk pipework").
Clean