Stainless Steel Milk Flask - Miele CM6x10 Operating Instructions Manual

Cleaning and care
If the milk pipework is blocked, clean it
under running water with the brush
supplied.
 Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
 Fit the dispensing unit back together.
 Push the dispensing unit back onto
the central spout. Press firmly to
ensure the spouts at the bottom
connect correctly with the edge of the
dispenser.
 Replace the stainless steel cover and
connect the milk pipework if
applicable.
56

Stainless steel milk flask

(CM6310)
The milk flask should be taken apart
and cleaned every day.
 Clean all parts by hand only using
hot water and a little washing-up
liquid. Use the cleaning brush
supplied to remove milk residues
from the milk pipework if necessary.
 Rinse all parts carefully under running
water.
Residual washing-up liquid can affect
the taste of milk from the machine and
the quality of the milk froth.
 Dry all parts thoroughly.
 Reassemble the milk flask.