Setting Up The Bean System - Miele CM 7750 Operating Instructions Manual

Before using for the first time

Setting up the bean system

After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 Touch
Yes .
If you select , the assistant for
No
setting up the bean system will not be
shown again.
Filling the bean containers
Useful tip: Open one bean container lid
at a time to prevent mixing of bean
types when filling the bean system.
 Take one of the lids off.
 Fill the first type of beans in this
container.
 Refit the lid.
 Repeat the steps for the other two
bean containers.
Useful tip: Make a note of each type of
bean if necessary.
After filling the bean containers, you
can now name the types of beans.
Naming the types of beans
The three bean containers are shown in
the display as follows and are pre-
named.
28
Type A
Type C
If you rename the bean containers,
please note the following:
– Choose concise names (max. 8
characters).
– If you are using the same type of
beans in two or three bean
containers at the same time (for
instance, because you only use one
type of bean), make sure you name
them in the same way exactly.
 Enter the name you want for the
bean container and then touch
A
Save .
 Now name the other two bean
containers.
appears in the display. Now
Continue
allocate bean types to the coffee drinks.
Allocating bean types
Selected drinks are marked with .
 Select a bean type.
 Now select the drinks that are to be
prepared with this type of bean.
 Select the next type of bean and
allocate it to other drinks.
Type B
Type